Go Back   SalinasRacing Forums > Classifieds > Internet Deals

Reply
 
Thread Tools Display Modes
Old 07-18-2013, 10:36 PM   #1
Wicked Motorsports
1/4 mile king
 
Wicked Motorsports's Avatar
 
Join Date: Oct 2008
Location: 831
Posts: 767
Rep Power: 10
Wicked Motorsports is on a distinguished road
Default Built LS1 trade for boat

I saw this add on SF bay area craiglist its not mine but i thought Id share it w/you guys....


I've got a built ls1 I wanna put out there on the market to see if anyone is interested. It's part of a project that I won't be able to continue for a few years. So it's a stock ls1 bottom end with new arp rod bolts for the increased rpm and hp. Got an slp ls6 ported oil pump with comp oil pump pickup. Covering all that is a polished fabricated aluminum oil pan, with remote oil filter and -10an stainless hoses and fittings. Next I installed the slp true double roller timing sprockets and chain. Installed new front crank seal on the front engine cover and new gasket. On the crank I installed an slp underdrive balancer pulley. Installed Texas speed ms3 cam (specs- duration-242/ lift-609") with there ls7 lifters and comps chromoly 7.4 pushrods. Now the heads are 04' zo6, 243 castings. They where taking to a machine shop and cleaned up, valve job, pressure tested, valves checked, new seals, guides and Texas speed dual valve springs were installed. Springs are good up to .650" lift. The heads were installed with .051" multi layered steel cometic gaskets and arp head bolts. Next I installed yella terra 1.7 roller rockers and to cover them up I bought some polished fabricated aluminum valve covers and aluminum msd coil pack brackets. The intake is a Holley (300-123) 102 mm intake. I was planing on running a th400 behind this engine, so I bought a tci flexplate and installed it with arp bolts. You can also use the flexplate with a 4l80e. Works with both. Its got the stock water pump and new gaskets as well as the steering pump, alternator and brackets. Well that's about it. If you have any questions feel free to give me a call, but please read before you call. I don't need to sell this engine, so don't even come at me with a lowball number. I'm asking $5,500. I think that's a rather fair number. Anyways you can email me or call Matt at (510) 772-9282. Thanks for your time, please don't waist my time if you don't have the money, would consider trading for a nice, running fishing boat. Thanks again.
Attached Images
File Type: jpg 3E93r93K35I45K15q2d77d3c81d24d0c01940.jpg (1.2 KB, 18 views)

Last edited by Wicked Motorsports; 07-18-2013 at 10:41 PM.
Wicked Motorsports is offline   Reply With Quote
Old 07-18-2013, 10:39 PM   #2
Wicked Motorsports
1/4 mile king
 
Wicked Motorsports's Avatar
 
Join Date: Oct 2008
Location: 831
Posts: 767
Rep Power: 10
Wicked Motorsports is on a distinguished road
Default

Heres some more pics
Wicked Motorsports is offline   Reply With Quote
Old 07-18-2013, 10:42 PM   #3
Wicked Motorsports
1/4 mile king
 
Wicked Motorsports's Avatar
 
Join Date: Oct 2008
Location: 831
Posts: 767
Rep Power: 10
Wicked Motorsports is on a distinguished road
Default

more
Attached Images
File Type: jpg 3M43L13N25G35r35H3d77f30d4d87e77c12b7.jpg (1.1 KB, 18 views)
File Type: jpg 3rb3Fe3Na5Lf5rd5t2d7780eb8e46254a1826.jpg (1.4 KB, 18 views)
Wicked Motorsports is offline   Reply With Quote
Old 07-20-2013, 10:00 AM   #4
Trukin
Racer
 
Join Date: Dec 2010
Posts: 209
Rep Power: 7
Trukin is on a distinguished road
Default

I read "buyer be ware"

It is a stock short block with the only upgrade being rod bolts. So, stock pistons, stock rods and I bet the rods were not resized when he did the rod bolt upgrade.

Stock Ls6 heads with a basic clean up, not porting etc.

For $5500 there are way better deals out there. Used 408's are same or in some cases less money.
Trukin is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -7. The time now is 01:32 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.